Mounting Dream MD2380 Full-Motion TV Wall Mount: A Buy-Once Guide (2026)
Will the Mounting Dream MD2380 fit your TV and your wall? It fits if your TV's VESA hole pattern is between 75 × 75 mm and 400 × 400 mm, the TV weighs under 99 lb, and you can bolt into two wood studs no more than 16 inches apart or into solid concrete. Every 65-inch TV we checked passes all three tests. Drywall alone, 24-inch stud spacing and 75-inch-plus panels do not. Our verdict: for a 32- to 65-inch TV on a standard 16-inch stud wall, this is the mount to buy; for anything bigger or wider-spaced, buy one of the alternatives below instead. When we checked Amazon US on 2026-10-19, ASIN B00SFSU53G was still the MD2380 (16" studs version) at $36.09; check the current price and seller on the listing. We did not install one ourselves; everything below comes from the maker, the listing and the outside sources linked at the end.
Check the Mounting Dream MD2380 on Amazon (US)
Choose this if, or choose another mount if
- Choose the MD2380 if your TV is 65" or smaller, its VESA pattern is within 400 × 400 mm, your studs are 16" apart (or the wall is solid concrete), and you want the TV to pull out and turn for a side seat.
- Choose the MD2380-24K if everything above is true but your studs are 18" or 24" apart; the listing names it as the wider-plate version.
- Choose the Sanus VLF728-B2 or EchoGear EGLF2 if the TV is 70" or larger or you need more reach; Wirecutter lists them at 125 lb with 28" and 22" of extension.
- Choose a tilt mount such as the Sanus VLT7 if your seats face the wall square-on and you only need to angle the screen down.
The fit check: maker specs vs real TVs
Mounting Dream's product page lists the MD2380 for 32"–65" TVs, 99 lb (the installation manual also uses 99 lb / 45 kg). The Amazon listing for the same part number now says 32"–70" and 110 lb. Both agree on VESA 75 × 75 to 400 × 400 mm. Until Mounting Dream's own page matches the listing, plan on the lower numbers. Here is how some current TVs line up, using each TV maker's spec sheet (weights without stand):
| TV (maker spec) | Weight | VESA | MD2380 fit |
|---|---|---|---|
| LG OLED65C5 (65") | 16.6 kg (36.6 lb) | 300 × 200 | Fits on every spec |
| TCL 65QM7K (65") | 39.6 lb | 300 × 300 | Fits on every spec |
| Samsung QN65Q60D (65") | 46.1 lb | 400 × 300 | Fits on every spec |
| Samsung QN70Q60D (70") | 62.8 lb | 400 × 300 | Inside the listing's 70", outside the maker page's 65" |
| TCL 75QM7K (75") | 54.2 lb | 300 × 300 | Weight and VESA fit, but 75" is above both size ranges |
| TCL 85QM7K (85") | 75.2 lb | 600 × 400 | Does not fit (VESA too wide) |
Weight is rarely the limit: even a 65-inch Samsung QLED uses under half of the 99 lb rating. Screen size and hole spacing are what rule TVs out. The manual's rule is to count accessories too, so add a soundbar bracket or camera if it hangs from the TV.
Stud and wall requirements
The MD2380 manual covers two wall types only. Mounting Dream states on the listing that its brackets are not for drywall installation.
- Wood studs: two studs, centers no more than 16" (406 mm) apart, each at least a nominal 2 × 4 (actual 1½" × 3½"). Four M8 × 60 mm lag bolts with washers go into 7/32" (5.5 mm) pilot holes drilled 2½" (64 mm) deep.
- Solid concrete: at least 8" (203 mm) thick, drilled with a 3/8" (10 mm) masonry bit to 2½". The concrete anchors are not in the standard box. Mounting Dream ships them on request (Φ10 × 50 mm).
- Load rule: the wall must support five times the combined weight of TV and mount, and the manual asks for a wall-plate integrity test before you hang the TV.
- Wider studs: if your studs are 18" or 24" apart, the listing points to the MD2380-24K instead.
Extension, tilt and swivel numbers
Per Mounting Dream and the listing: the arm pulls out to 17.5" and retracts to 3.4"; tilt is +5° / −15°, set by loosening two tilt bolts with the included Allen key; swivel is 45° each way; post-install leveling is ±3°. The listing describes the arm as six articulating arms with robot-welded joints, and Mounting Dream gives the material as cold-rolled steel.
Longer arms let a wide TV turn further before its edge meets the wall. So the MD2380's 17.5" reach suits mid-size TVs better than very wide ones.
What's in the box
From the manual's parts list and the listing's Q&A: the wall plate and arm assembly, two TV brackets, a paper mounting template, a bubble level, an Allen key, four M8 × 60 mm lag bolts with washers, and TV screws in M4, M6 and M8 sizes and several lengths, plus spacers and washers for TVs with recessed holes. The listing says an HDMI cable is no longer included. Concrete anchors are free on request but not in the box. Tools you supply: stud finder, drill with 7/32" wood bit (or 3/8" masonry bit), 1/2" (13 mm) socket wrench, screwdriver and tape measure.
Warranty and the listing details
Mounting Dream's product page gives a 10-year warranty for the MD2380. The Amazon listing says "lifetime warranty", and Mounting Dream's homepage says its products come with a lifetime warranty. Keep your order confirmation and ask Mounting Dream which term applies to your purchase. The listing also notes "There is a newer model of this item", so compare the two pages before ordering. The listing gives the item weight as 11.2 lb, and the manufacturer part number is still MD2380.
Pros and cons
- Pro, real tilt range: −15° of forward tilt matters when the TV hangs high; Digital Trends' wall-mount buying guide advises a tilting mount for TVs above the average 42-inch eye level.
- Pro, fixable after install: ±3° post-install leveling means a slightly crooked plate can be corrected without redrilling (maker spec).
- Con, the maker's own numbers disagree: the product page says 65" and 99 lb, the listing 70" and 110 lb. Plan on the lower figures.
- Con, deeper than slim mounts: it retracts to 3.4" from the wall, against 2.15" for the Sanus VLF728-B2 per Wirecutter.
- Con, narrow wall choice: 16" studs or solid concrete only, no drywall, and concrete anchors are not in the box.
Who should skip it
- Owners of TVs over 65", or close to the 99 lb rating: use a 42"–90" mount from the choice list above.
- Drywall with no studs where the TV must go, or a rented wall you cannot drill: a floor or tabletop TV stand is the safer route.
- Anyone who wants the slimmest look: at 3.4" retracted, it sits further out than the roughly 2" mounts Wirecutter favors.
Cost per use, with labeled assumptions
Price shown on Amazon on 2026-10-19: $36.09. Assumption: the mount stays on the wall every day for 7 years (365 × 7 = 2,555 days). That is our planning figure, not a lifespan claim. Formula: $36.09 ÷ 2,555 = about $0.014 per day. On the same assumption, Wirecutter's listed $430 price for the Sanus VLF728-B2 works out to about $0.17 per day; that is the cost of the longer reach. Try your own numbers in our cost-per-use calculator.
Around the TV
Leave enough HDMI and power slack for the full 17.5" pull-out, and plug streaming sticks in before you hang the TV. Our Fire TV Stick 4K Select guide and Roku Streaming Stick HD guide cover the HDMI clearance each needs. For a bedroom TV, see our Echo Spot nightstand speaker guide. More living-room picks are on our tech and audio buy-once guides hub.
FAQ
Will the MD2380 hold a 65-inch TV?
Usually yes. Mounting Dream's page lists 32"–65" and 99 lb, with VESA 75 × 75 to 400 × 400 mm. The 65-inch LG OLED65C5 (16.6 kg, 300 × 200), TCL 65QM7K (39.6 lb, 300 × 300) and Samsung QN65Q60D (46.1 lb, 400 × 300) all fall inside those limits.
Can I install it on drywall or on 24-inch studs?
No. The manual allows only wood studs up to 16" apart or solid concrete at least 8" thick, and says not to install into drywall alone. For 18" or 24" studs, the listing points to the MD2380-24K.
Is an HDMI cable included?
Not anymore, according to the listing's Q&A. You get lag bolts, M4/M6/M8 TV screws, spacers, washers, a bubble level, an Allen key and a paper template. Concrete anchors come from Mounting Dream on request.
What warranty does the MD2380 have?
Mounting Dream's product page says 10 years. The Amazon listing and Mounting Dream's homepage say lifetime. Keep your order record and confirm the term with Mounting Dream.
Bottom line
Buy the Mounting Dream MD2380 if your TV is 65" or smaller, its holes are within 400 × 400 mm, and you can hit two wood studs 16" apart or solid concrete. At about $36 it's one of the cheapest ways to get 17.5" of reach and real tilt and swivel. Skip it for 75-inch-plus panels, wide stud spacing, drywall-only walls, or if you want a sub-2.5" profile. Re-check the price, the seller and the "newer model" note on ASIN B00SFSU53G before ordering. US amazon.com only, tag buywellonce-20.
See the Mounting Dream MD2380 listing on Amazon (US)
Primary sources: Mounting Dream MD2380 product page, Mounting Dream warranty statement, Wirecutter's best TV wall mounts, Samsung Q60D spec sheet, LG C5 owner's manual specs, TCL QM7K specs and the TCL QM7K spec sheet. Also read: Digital Trends TV wall-mount buying guide, Inside Out Home Reviews and Short Film Central.
Editorial note: Incorrect wall installs can cause injury or property damage. Follow the manufacturer manual or hire a qualified installer.